The Most Effective Way to Draw a peacock

The Most Effective Way to Draw a peacock. Don’t press too hard with the pencil for the first small advance. Start with light, flowing strokes in this peacock drawing.

The time needed: 90 minutes.

Draw a Peacock Step by step

Step 1

Draw a small circle at the bottom of the paper as a guide for the peacock’s body. First, draw four remote controls for the circle’s height and width, then use the folded lines to adjust the footprints. Assuming you’re having trouble drawing the circle, follow the outside edge of a coin, lid, or another object with a rounded edge.

Step 2

On top of the body, near the left side, draw a small circle to help for the peacock’s head. Concentrate on the arrangement and size of this circle, which corresponds to the first.

Step 3

Define two borders connecting the peacock’s head to the body to frame the neck helper.

Step 4

Emphasize the body as a guide for the peacock’s legs.

Step 5

On either side of the peacock’s body near the base, define two long flat edges as guides for the beginning segment of the tail. You are just direct. The more of these you make, the bigger the bird’s tail will get.

Step 6

Leave a small footprint high on the body to demonstrate tail height. The higher you draw this footprint upside down, the taller the peacock’s tail will be. Attach the curved line footprint to the flat line fasteners below to complete the peacock tail help. The tail state should be like a big letter D on one side. Focus on the size of the tail concerning the bird’s body. You can also greatly increase the tail if you wish.

Step 7

Draw a dot on the inside of the head, near the center, for the peacock’s eye. The eye will be tiny, so don’t stress about adding too much detail.

Step 8

Add the peacock nose by gently outlining an angular line on the lower-left half of the head. Draw a series of small folded lines inside the head for the base of the mouth. Hide the corner line. Add an extra line on the ideal for the bird’s mouth and an uppercut for the nostril.

Step 9

Draw two or three short, creased lines for the lace base on the top of the head. At the top of the base, draw a wavy, cloud-like shape for the feathers to texture the tip. Add a few extra lines down the middle for more feathering.

Step 10

Darken the circle below to create the head. Try not to cover the peacock’s toe feathers.

Step 11

Dim the lines underneath the head to create the peacock’s neck. The right line should go towards the bird’s body.

Step 12

Use the bottom part of the central circle as a direction to tauten the peacock’s body. Darkening the line for the body, add an extra leg stroke for the padded base.

Step 13

Add the peacock leg on the right by first drawing several lines around the helper. Draw the toes near the base using the slanting lines on the sides, and currently use the tip of the line below as a guide to pull the tip to the center.

Step 14

Draw the left leg in the same way. First, follow the guide to draw the top leg. Then, at this point, add the peacock toes to the base using slanting lines.

Step 15

Delete as many containers with underlying rules. Try not to get rid of the peacock tail helper just yet. Try not to stress yourself out by eliminating wizards as a whole. Leaving something behind is okay. Carefully uproot the tail helper so as not to confuse the varieties too much with graphite in the next step. Redraw any last few sketch lines that you may have accidentally uprooted.

Step 16

Vary your design! Start by including the spots on the peacock’s fantail. This shape should look like a little Pac-Man looking down. Alternation in the rest of the headband at the base with blue. Using Yellow Green and Matte Green, draw a gem-like shape around the oval. Also, add a touch of matte brown to the first oval.

Step 17

Currently, about 100 times more do this in the fantail! It’s easiest to first poke the underlying light earth-colored ovals through the peacock’s tail and then complete the eye patches. The points should form thrusts transmitted from the body’s center to the folded helper underneath. Stun the dots, so the lines they create aren’t entirely smooth. It’s okay if the columns and ovals aren’t perfect. It makes the tail more natural and less inflexible. It goes over a free part on one side of the body because that’s where the bird’s body condition bends up.

Now add the detail on the other peacock patches just as you did on the main buttonhole. Use light blue to create a circle at the bottom of each oval. Then, at that point, use the matte blue to draw a shape like a crescent inside the circle. Adding eyespots around the tail can be VERY tedious, so be patient and enjoy the tremors. There’s no trick or easy way to add eyespots.

Step 18

Now add the light and soft brown to the other spots. It might be smart to draw a piece one day and then return to that point and do other things another day to separate the interaction. Now add the yellowish-green and the matte green around the peacock’s eyes.

Use matte green to start adding peacock feathers between the eyespots. Use all the faster and shorter strokes of matte green to fill in the holes between the eyespots. Paste all the faster, shorter strokes into the holes with Dark Brown and Dim.

Use matte blue for the outer edges of the peacock’s body and head. It currently uses regular blue in the body but leaves a free streak to address the luster of the feathers. It currently uses blue in the body and mixes different blue shades. Leave a segment around the clear eye. Use dim on the bird’s mouth and legs.

Final Step

Keep adding greens and chestnuts to the peacock tail until you’re happy with what you have. It’s generally smart to use the reference when drawing.

Drawing Completed

Also, read 3 Lifestyle Trends That Are Defining 2022.