Travel and Leisure

Headlights important

Headlights important


Since the sun sets early a few weeks ago after summer time ends, most commuters go home in the evening or in the dark of night. To stay safe in the dark, it is important to take the time with the necessary safety precautions. That means keeping your headlights, your passengers and other drivers safe on the roads.

Transparent, bright lights make all the difference

Headlights are obviously an integral part of your car and keeping them in good condition is important for several reasons. Well designed and cared for front lights can mean the difference between life and death. The front headlights can help you spot unexpected road signs, signs, and obstacles. Over time, the headlights inevitably become covered with sadness, the lightbulbs darken and burn out. Bright, clear headlights give you an extra moment or two for reaction time to better respond to unexpected obstacles like potholes, deer, or dirt on the road. The headlights are on, letting other cars know you are coming. Bright lights mean more visibility and safer movement.



Front and rear headlights ensure that other drivers can see, even if they are less visible. This is important to avoid accidents.

Drivers should be aware of the fact that daytime running lights do not turn on taillights and headlights. You will need these lights in bad weather like rain, snow, fog or darkness.

Part of the “it will be seen” concept that people see you when you walk down the street. This function creates front lights. Motorists need to ensure that both the lower and upper bars are working properly. Headlights should be checked regularly (or with the help of) to see your path and not to see the fighting of oncoming drivers (possibly if the lights are set too high). Lighting lenses should be kept clean (due to time and abrasion from the road, a layer of dirt can build up on the lenses).

If you’re walking around with poles and the oncoming car is within 150 meters or within 60 meters of you, turn off the top bar lights.


The second most important part of fog lamp lighting. Most drivers don’t know when to use these particular headlights. You can use it when the fog is dense and the lights are not enough to ensure proper visibility (drops are attached to the light). When this happens, the light bulb will flash back into the driver’s eyes, making the situation worse. In this case, the driver should turn off the headlights and fog lights.

It is also important that drivers turn off fog lights at night on unlit roads as this can dazzle future vehicles. The fog is not designed for illumination in clear weather. If you want to use fog lights as extra lights to illuminate the road in the middle of a clear night, don’t just turn them off when you see oncoming traffic.


Turn signals and brake lights support side connections.

Ensuring safety is important so that the drivers behind you know when to accelerate or stop. The traffic light is bright and red. Do not use a defective brake light.

Turn signals can help other drivers know if they are about to change lanes or turn. If you do not show your intentions in time, you can surprise other drivers, which can easily lead to an accident.

After turning or completing the line change, it is important to turn off the turn signals. If you do not do this, a light signal can irritate other drivers and endanger safe traffic.


Every driver should check the lighting system regularly to make sure all lights are working.

It’s easier than you think.

You can look at the headlights and taillights if you turn on the full headlights while walking around the car. You can see if the lights are on or not. If you have a passenger, ask them to check the brake lights. You can check the brake lights yourself. For example, when you return to the parking lot in front of the store, you can see the brake lights on the shop windows.



The main function of the headlights in cars is to illuminate the road and enable tireless driving and safety. The headlights and their simple springs are the safety features of the car. You need legal recognition and shouldn’t be disturbed. The nature and place of simple operation of the vehicle and its construction, simple sources, colors and photometric values ​​are regulated by law.


Modern cars have the following headlight systems:

Halogen lamps


The headlights with H3, HB3, H7 and H9 are traditionally used in vehicle lighting. They are still very popular today. Advances in halogen technology have resulted in better value for money for halogen lamps as the first device.

Xenon lamps

Xenon light has two distinct advantages over light emitted by conventional halogen lamps:

  • Firstly, the xenon lamp delivers more than twice the light of a modern H7 lamp, but only needs 2/3 the power.
  • Second, the light color of the xenon lamp is similar to daylight. This extra light makes the road easier and brighter.

Dangers at the roadside and even on the road are recognized immediately. Improved street lighting and daytime quality of the xenon lamp harmonize with the natural viewing habits of the human eye – drivers do not get tired quickly and use a more relaxed driving style.

LED lights are full

LEDs (light emitting diodes) are becoming increasingly popular in the automotive industry. Leading manufacturers have successfully expanded the range of applications for motor vehicles

LED lights are full

LEDs (light emitting diodes) are becoming increasingly popular in the automotive industry. Leading manufacturers have successfully expanded the range of applications for vehicles of all types at high speeds. Reliability, cost efficiency and design diversity are convincing arguments that support the use of LEDs in conventional systems.


Related Articles

istanbul escort
Back to top button