The optimum location between your router and the wifi dead zones is the place where the WIFI signal reaches up to 70 %. Learn about the setup and placement process between your Rockspace wireless router and the WIFI extenders. The range extender could only work when you place it in a position to obtain a strong signal from the router.
- Then the process is required to put the accessories of the range extender to its required place.
- Hook up the wireless WIFI range extender antennas first.
- Then find a power outlet near your wifi router and then plug the extender just there.
- Now turn on the range extender by pressing the power button of the extender.
- And then you have to get linked to the wireless network of Re.rockspace.local for login.
- At this time, open the web directory. Navigate the address line of the web directory to http://ap.setup.
- But the Rockspace official web interface makers suggest we use any web browser.
- You can use a web browser like Google Chrome, Safari or Internet Explorer.
- Prefer using the web version 8.0 or more.
- Here the users are instructed not to use Firefox for some of the safety reasons.
- Then you have to fill in the user key and the passkey of your Rockspace ap.setup a wireless range extender.
- Entering the username and password will take you up to the default Homepage.
You can now visit the Dashboard of your Rockspace wireless setup. Hereafter, you have to scan the available wifi networks around your Rockspace ap.setup WIFI extender, then tap on it to extend the WIFI router. Then, search for your setup.ampedwireless.com home network and the WIFI name you want to expand.
Use the Push and connect method for Rockspace router login in a Bridge Mode
This method is known as Push and Connect method because it can be done by simply pressing the WPS button on the Rockspace router.
- Let us have a light over this amazing process to connect to your router.
- Switch on the Rockspace local Wi-Fi router by fixing it to a power outlet.
- Press the WPS button available on the top of the router.
- After pressing on the WPS button, the LED lights will start fluctuating rapidly.
- This indicates that your Rockspace Wi-Fi router is trying to connect for WPS connection.
- Now after two minutes, you need to press the WPS button on your home router.
- As soon as you press the WPS button of your home router, the router will get connected to the router.
- And then, the LED over the router will become stable.
- After going through all the above-mentioned steps, your Rockspace router will be connected to another router.
How do I get the default login credentials of my Rockspace local
If you are trying to configure your Rockspace local, then make sure that you have a piece of complete information about the default login addresses, and the default gateways of your Re.rockspace.local by default it is the login gateway of your Rockspace router. The IP address can also be the default gateway of your router.
If using static IP address
If you are using http://192.168.0.1 to enter into the web interface of your router with a static IP address, then you should have to go to the following network keys one by one;
- Control Panel
- Network Connections
- Local Area Network
- Properties, then
- Select Internet Protocol; TCP/IP, and the
- Hit the option “Properties.”
Use the below options to set the IP address, DNS server, and Subnet mask;
- IP address can be: 192.168.0.5
- Subnet Mask can be: 255.255.255.0
- Default Gateways can be: 192.168.0.1
- The preferred DNS server: 202.129.64.1 or it can be 4.2.2.3
Use a genuine web browser
Use a genuine web browser or you can use the options whichever your ISP provides to you. Click the OK tab continuously two times, and then open a web directory, like internet explorer, Mozilla Firefox, Safari for iOS, etc. In the address bar of the browser use the above-mentioned IP address and click login or continue.
Getting the basic home page
On the login page of your Rockspace local. And now, enter the default credentials of your router. Take the details of the login credential from the body of the router, and input them in the respective places. The password will be left blank by default. Then click continue, and you will get the login page of your Re.rockspace.local
If you do not get the basic home page of your router, then you need to reset your Rockspace router using the reset button on its hardware. Reset will bring it to the default configuration. After getting the Rockspace local default configuration, you can log in to its web-based console.